Playfield TV Mount
I have these in STANDARD Williams/bally width (wood is 20.375 wide,28 long) and WIDEBODY WPC width. (wood is 23 wide, 30.75 long) Material is 3/4", veneered plywood, usually oak/maple/birch, from the local Lowes, currently at about $80-90 a sheet. If you are doing a 3/4 scale or custom cabinet, you can give me width and length requirements, and i can cut to spec. The slots are spaced to accept standard 100x100 and 200x200 VESA mount pattern, the extra slots let you move your screen all 4 directions to get it just right. All you do is drill 4x 1/4" holes into your cabinet sides, I included 4 standard cabinet shelf pins, and this rests on those pins, there are pocketed out reliefs (see pics). the center to center of the pins is 20.5 inches. If you want to be able to stand your unit up, and not worry about the screen falling, you can attach arcade control panel latches and secure it that way.
I have these in STANDARD Williams/bally width (wood is 20.375 wide,28 long)
and WIDEBODY WPC width. (wood is 23 wide, 30.75 long)
Material is 3/4", veneered plywood, usually oak/maple/birch, from the local Lowes, currently at about $80-90 a sheet.
If you are doing a 3/4 scale or custom cabinet, you can give me width and length requirements, and i can cut to spec.
The slots are spaced to accept standard 100x100 and 200x200 VESA mount pattern, the extra slots let you move your screen all 4 directions to get it just right.
All you do is drill 4x 1/4" holes into your cabinet sides, I included 4 standard cabinet shelf pins, and this rests on those pins, there are pocketed out reliefs (see pics).
the center to center of the pins is 20.5 inches.
If you want to be able to stand your unit up, and not worry about the screen falling, you can attach arcade control panel latches and secure it that way.
| Title | Playfield TV Mount |
|---|---|
| Category | Pinball Parts |
| SKU | q6d2BQJ |
| Condition | new |
| Weight | 16.0 lb |
