Pinball Plunger Kit with PinOne

Cleveland Software PINONE Control board included!

This is made for PC based builds, not plug and play with atgames/arcade1up/legends cabinets, etc.

Includes a new Williams/bally plunger with the blue spring upgrade(not so hard to pull), the plunger kit to pickup the signal and translate it tobe used with a virtual pinball cabinet.

4 mounting feet/screws are provided as well.

This isnt just a off/on switch, you pull back the plunger a inch, thats whats you get in the game, lets you make those skill shots!

3D Printed parts vary in color.

Ive been building Vpins since 2014, and I use a pinone board in every cabinet now, all my buttons route to it, it’s a nudge board, and it supports a plunger! It can also work with DOF and make  your buttons flash. (like START button flashing, etc)

Williams/bally plungers are made for ¾” thick wood, if you have something thinner, you will have to make up something to take up the gap,so the unit will tighten together.

Wiring is about 15 Inches or so between the pinone and plunger. Includes USB -C cable to connect to PC.

If you dont have prior knowledge of how to use a PINONE, Cleveland Software Design's site has ALL the details, wiring diagrams, etc, on his website.

People who gut their old atgames/arcade 1up cabinets, buy this setup to work the PC they use for the project.